Mã lỗi máy in Hp436|Error code HP M436| hpM440

Trang chủ»Lỗi máy in»Lỗi - service máy in hp

Mã lỗi máy in HP M436 - error code HP m436 - HP M436 - lỗi hp436

Code: A2-2110 - Mã lỗi máy in HP M436
Display:A2-2110, Error: #A2-2110 / Fan Failure: #A2-2110. Turn off then on. Call for service if the problem persists
Description:Fuser fan does not operate.
Remedy:1. Turn the printer off then on.2. If the error persists, send an on-site technician to perform the remaining steps.3. Turn the printer off.4. Remove the rear cover.5. Check if the fuser fan connector is connected to the main board correctly. 6. If the connection is OK, replace the Fuser Fan (HP Part #: SAM-JC31–00160A).

Mã lỗi máy in HP M436 Code: A3-3311, A3-3312, A3-3320
Display:A3-3311, A3-3312, A3-3320, A3-3411, A3-3412 Sensor errors
Description:–A3-3311, Error: #A3-3311 / Sensor Failure: #A3-3311. Turn off then on. Call for service if the problem persists–A3-3312, Error: #A3-3312 / Sensor Failure: #A3-3312. Turn off then on. Call for service if the problem persists–A3-3320, Not proper Room Temp / The room temperature is not suitable for this set use. Please adjust room temperature–A3-3411, Error: #A3-3411 / Sensor Failure: #A3-3411. Turn off then on. Call for service if the problem persists–A3-3412, Error: #A3-3412 / Sensor Failure: #A3-3412. Turn off then on. Call for service if the problem persists
Temperature/Humidity sensor is defective.
Remedy:1. Turn the printer off then on.2. If the error persists, send an on-site technician to perform the remaining steps.3. Remove the left cover. 4. Measure the resistance value of the connector at both ends.› If the values is not in 10KOm +- 1% (@ 25 C), replace the Temp./humidity Sensor (HP Part #: SAM-JC66.03969A). 5. If the sensor is normal, replace the Main Board PBA: M436n/M436dn SAM-JC92–02607G M436nda SAM-JC92–02607H

Mã lỗi máy in HP M436 Code: A3-3411, A3-3412
Display:A3-3311, A3-3312, A3-3320, A3-3411, A3-3412 Sensor errors
Description:–A3-3311, Error: #A3-3311 / Sensor Failure: #A3-3311. Turn off then on. Call for service if the problem persists–A3-3312, Error: #A3-3312 / Sensor Failure: #A3-3312. Turn off then on. Call for service if the problem persists–A3-3320, Not proper Room Temp / The room temperature is not suitable for this set use. Please adjust room temperature–A3-3411, Error: #A3-3411 / Sensor Failure: #A3-3411. Turn off then on. Call for service if the problem persists–A3-3412, Error: #A3-3412 / Sensor Failure: #A3-3412. Turn off then on. Call for service if the problem persists
Temperature/Humidity sensor is defective.
Remedy:1. Turn the printer off then on.2. If the error persists, send an on-site technician to perform the remaining steps.3. Remove the left cover. 4. Measure the resistance value of the connector at both ends.› If the values is not in 10KOm +- 1% (@ 25 C), replace the Temp./humidity Sensor (HP Part #: SAM-JC66.03969A). 5. If the sensor is normal, replace the Main Board PBA: M436n/M436dn SAM-JC92–02607G M436nda SAM-JC92–02607H

Mã lỗi máy in HP M436 Code: C1-1110, C1-111A
Display:C1-1110, C1-111A Toner error
Description:–C1-1110, Prepare new toner / Prepare new toner cartridge–C1-111A, Shake toner cart. / Shake toner cartridge and then install. Replace toner cartridge if the problem persists
Toner remaining is 5 ~ 30% of its life.
Remedy:1. Check the life remaining of the toner cartridge.2. Open the front cover. 3. Take out the toner cartridge. 4. Shake the toner cartridge horizontally to distribute the toner evenly inside the cartridge. 5. Reinstall the toner cartridge. 6. If the toner cartridge yield is expired, have the customer purchase a new toner cartridge (HP Part #: CF-256A).

Mã lỗi máy in HP M436 Code: C1-1140, C1-1160, C1-1170
Display:C1-1140, C1-1160, C1-1170 Toner errors
Description:– C1-1140, Replace new toner / End of life, Replace with new toner cartridge – C1-1160, Replace new toner / Replace with new toner cartridge – C1-1170, Replace new toner / End of life, Replace with new toner cartridge
The toner cartridge is at the end of its life.
Remedy:1. Check the life remaining of the toner cartridge. 2. If the toner cartridge yield is expired, have the customer purchase a new toner cartridge (HP Part #: CF-256A).

Mã lỗi máy in HP M436 Code: C1-1313, C1-1314
Display:C1-1313, C1-1314 Errors
Description:– C1-1313, Shake toner cart. / Shake toner cartridge and then install. Call for service if the problem persists – C1-1314, Remove seal tape / Did not supply enough toner. Remove seal tape of toner cartridge or shake it. Call for service if the problem persists
Toner supply is inefficient or abnormal.
Remedy:1. Turn the printer off. 2. Open the front cover. 3. Take out the toner cartridge. 4. Shake the toner cartridge horizontally to distribute the toner evenly inside the cartridge. 5. Check if the seal tape is removed. If not, remove it. 6. If the error persists, send an on-site technician to perform the remaining steps. 7. Remove the rear cover. 8. From the control panel, enter Tech Mode and run the toner drive motor test: Menu > # > 10043616 > Menu > Tech Menu > Diagnostics > Engine > Test Routines > 111.Toner > 0030. Supply Mot K £ If the test fails, replace the Toner Drive Motor (HP Part #: SAM-JC31.00078A). 9. If the problem persists, replace the toner cartridge (HP Part #: CF256A-67901).

Mã lỗi máy in HP M436 Code: C1-1411
Display:C1-1411 Toner Not Installed / Toner cartridge is not installed. Install it
Description:The toner cartridge is not installed or not detected.
Remedy:1. Open the front cover. Check if the toner cartridge is installed.2. Remove and reinstall the toner cartridge.3. If the error persists, check if the toner cartridge modular jack is contaminated or deformed.£ If the jack is damaged, replace the cartridge (HP Part #: CF256A-67901). 4. Replace the toner cartridge with a new one (HP Part #: CF256A-67901).

Mã lỗi máy in HP M436 Code: C1-1512
Display:C1-1512, Toner Not Compatible / Toner cartridge is not compatible. Check guide
Description:Toner cartridge is not compatible.
Remedy:1. Open the front cover. Check if the toner cartridge is installed.2. Remove the toner cartridge and re-install.3. If the error persists, remove the toner cartridge. 4. If the toner cartridge is not HP genuine, have the customer purchase a new toner cartridge (HP Part #: CF-256A).

Mã lỗi máy in HP M436 Code: C1-1711, C1-1712
Display:C1-1711, C1-1712 Errors
Description:–C1-1711, Error: #C1-1711 / Toner Cart Failure: #C1-1711. Call for service–C1-1712, Error: #C1-1712 / Toner Cart Failure: #C1-1712. Call for service The toner cartridge is not installed or not detected.
Remedy:1. Open the front cover. Check if the toner cartridge is installed.2. Remove the toner cartridge and re-install.3. If the error persists, check if the toner cartridge modular jack is contaminated or deformed.£ If the jack is damaged, replace the cartridge (HP Part #: CF256A-67901).

Mã lỗi máy in HP M436 Code: C3-1110
Display:C3-1110, Prepare IMG. Unit / Prepare new imaging unit
Description:Imaging unit remaining is 5 ~ 30% of its life.
Remedy:1. Check the life remaining of the drum unit. 2. If its life is at the end, turn the printer off and open the front cover. 3. Remove the toner cartridge. 4. Have the customer purchase a new Imaging Unit (HP Part #: CF257A).

Mã lỗi máy in HP M436 Code: C3-1140, C3-1150, C3-1170
Display:C3-1140, C3-1150, C3-1170 Imaging unit errors
Description:– C3-1140, Replace IMG. Unit / End of life, Replace with new imaging unit – C3-1150, Replace IMG. Unit / Replace with new imaging unit – C3-1170, Replace IMG. Unit / End of life, Replace with new imaging unit
The imaging unit has almost reached the end of its life.
Remedy:1. Check the life remaining of the Imaging Unit. NOTE: The life of the Imaging Unit is approximately 80k pages. 2. If its life is at the end, have the customer purchase a new Imaging Unit (HP Part #: CF257A).

Mã lỗi máy in HP M436 Code: C3-1312, C3-1411, C3-1414
Display:C3-1312, C3-1411, C3-1414 Imaging unit errors
Description:– C3-1312, Error: #C3-1312 / Imaging Unit Failure: #C3-1312. Install IMG. Unit – C3-1411, IMG. Not Installed / Imaging unit is not installed. Install the unit – C3-1414, Error: #C3-1414 / Imaging Unit Failure: #C3-1414. Install imaging unit again
The imaging unit is not installed or not detected.
Remedy:1. Open the front cover. Check if the imaging unit is installed. 2. Remove and reinstall the imaging unit. 3. If the error persists, check if the Imaging Unit connector is contaminated or deformed. £ If the connector is damaged, replace the Imaging Unit (HP Part #: CF257.67901). 4. If the error persists, replace the Imaging Unit (HP Part #: CF257.67901).

- Mã lỗi máy in HP M436 Code: C3-1512
- Display:C3-1512, IMG. Not compatible / Imaging unit is not compatible. Check guide
- Description:The imaging unit is not installed or not detected.
- Remedy:1. Open the front cover. Remove the toner cartridge. 2. Remove and reinstall the Imaging Unit. 3. Install the toner cartridge and close the front cover.. 4. Check the part # of the installed Imaging Unit. (HP part numbers are CF257A and CF257.67901.) £ If the Imaging Unit is not HP genuine, have the customer purchase a new Imaging Unit (HP Part #: CF257A).
- Mã lỗi máy in HP M436 Code: C3-1711, C3-1712
- Display:C3-1711, C3-1712 Imaging unit errors
- Description:– C3-1711, Error: #C3-1711 / Imaging Unit Failure: #C3-1711. Call for service – C3-1712, Error: #C3-1712 / Imaging Unit Failure: #C3-1712. Call for service
  The imaging unit is not installed or not detected.
- Remedy:1. Open the front cover. Check if the imaging unit is installed. 2. Remove and reinstall the Imaging Unit. 3. If the error persists, check if the Imaging Unit connector is contaminated or deformed. £ If the connector is damaged, replace the Imaging Unit (HP Part #: CF257.67901). 4. If the error persists, replace the Imaging Unit (HP Part #: CF257.67901).
- Code: C9-2110, C9-2120
- Display:C9-2110, C9-2120, Prepare TR. Roller / Prepare with new transfer roller
- Description:Transfer roller is at the end of its life.
- Remedy:1. Open the side cover.2. Have the customer purchase a new Transfer Roller Kit (HP Part #: W7401–67901).
- Code: C9-2220
- Display:C9-2220, Error: #C9-2220 / TR Failure: #C9-2220. Install TR roller again
- Description:Transfer roller is at the end of its life.
- Remedy:1. Open the side cover. 2. Have the customer purchase a new Transfer Roller Kit (HP Part #: W7401–67901). 3. If the error persists, send an on-site technician to replace the HVPS Board (HP Part #: SAM-JC44–00229A).
- Mã lỗi máy in HP M436 Code: H1-1210
- Display:H1-1210, Paper jam in tray 2
- Description:Paper jam has occurred in tray 2. (Pickup roller is worn out.)
- Remedy:1. Open the SCF right cover. Remove the jammed paper.2. Remove tray 2. Remove the jammed paper.3. Check if the pickup roller is worn out or contaminated.4. Clean the pickup roller with a lint free cloth and water only.5. If the error persists, send an on-site technician to replace the Pickup Roller and Friction Pad Kit (HP Part #: W7U01–67903).
- Mã lỗi máy in HP M436 Code: H1-1220
- Display:H1-1220 Tray 2 door is open. Close it
- Description:Tray 2 cassette is pulled out. Insert it properly.
- Remedy:1. Remove and insert tray 2 correctly.2. If the message persists, send an on-site technician to perform the remaining steps.3. Replace the tray 2 Photo Sensor (HP Part # SAM-0604–01393).4. If the message persists, replace the PBA Board, Secondary Cassette Feed (HP Part #: SAM-JC92–02511C).

Mã lỗi máy in HP M436 Code: H1-1230
Display:H1-1230, Error: #H1-1230 / Input System Failure: #H1-1230. Check tray 3 connection
Description:Communication error has occurred between the copier and SCF.
Remedy:1. Turn the printer off the on.2. If the error persists, send an on-site technician to perform the remaining steps.3. Disassemble the SCF unit.4. Check if the interface cable on SCF main board is connected correctly.5. If the error persists, replace the PBA Board, Secondary Cassette Feed (HP Part #: SAM-JC92–02511C).6. Install the copier on the SCF unit.

Mã lỗi máy in HP M436 Code: H1-1252, H1-1254
Display:H1-1252, H1-1254, Paper empty in tray 2 / Paper is empty in tray 3. Load paper
Description:Paper in tray 2 is empty or near empty. / The photo sensor is defective.
Remedy:1. Remove tray 2 and load the paper.2. If the message persists, send an on-site technician to replace the SCF Cassette Tray (HP Part #: SAM-JC90–01226B).

Mã lỗi máy in HP M436 Code: M1-1110
Display:M1-1110, Paper jam in tray 1
Description:Paper jam has occurred in tray 1.
Remedy:1. Open the side cover and check if a foreign substance or paper is jammed inside the unit.2. Remove tray 1 and remove the jammed paper. 3. If the jam error occurs frequently, send an on-site technician to replace the Pickup Roller and Friction Pad Kit (HP Part #: W7U01–67903).

Mã lỗi máy in HP M436 Code: M1-1610
Display:M1-1610, Paper jam in tray 1
Description:Paper jam has occurred in tray 1.
Remedy:1. Open the side cover and check if a foreign substance or paper is jammed inside the unit.2. Remove the jammed paper from tray 1.3. If the jam error occurs frequently, send an on-site technician to replace the Pickup Roller and Friction Pad Kit (HP Part #: W7U01–67903). 4. If the error persists, replace the Clutch (HP Part #: SAM-JC66–03983A).

Mã lỗi máy in HP M436 Code: M1-5112, M1-5113
Display:M1-5112, M1-5113, Paper empty in tray 1 / Paper is empty in tray 1. Load paper
Description:Paper in tray 1 is empty or almost empty. / The photo sensor is defective.
Remedy:IMPORTANT: Before following the instruction below, remove the toner cartridge and imaging unit. If not, toner will pour inside the printer. 1. Remove tray 1 and load paper. 2. If the message persists, send an on-site technician to perform the remaining steps. 3. Remove the tray 1 and stand the copier on its left side to see the bottom. 4. Actuate the Empty Sensor to see if it moves freely. Replace the Empty Sensor if needed (HP Part #: SAM-0604–001393). 5. Check if the Empty Actuator is assembled correctly. If the actuator is defective, replace it (HP Part #: SAM-JC61–01350A).

Mã lỗi máy in HP M436 Code: M1-5120
Display:M1-5120, All Trays Empty / Paper is empty in all trays. Load paper
Description:Paper in all trays is empty or near empty. / The photo sensor is defective.
Remedy:Refer to “H1–1252, M1–5112, M1–5612” troubleshooting.

Mã lỗi máy in HP M436 Code: M1-5610
Display:M1-5610, Paper Normal in Tray 1
Description:Paper in tray 1 is normal.
Remedy:This message shows the printer can print the page from Tray 1 normally.

Mã lỗi máy in HP M436 Code: M1-5612
Display:M1-5612, Paper empty in Tray 1. Load paper
Description:Paper in tray 1 is empty or almost empty. / The photo sensor is defective.
Remedy:1. Load paper in tray 1. 2. If the message persists, send an on-site technician to perform the remaining steps. 3. Remove the toner cartridge and Imaging Unit. 4. Stand the copier on end to see the bottom. IMPORTANT: Before doing this, remove the toner cartridge and imaging unit. If not, toner will pour inside the printer. 5. Check if the Tray 1 Empty Sensor works normally. If needed, replace it (HP Part #: SAM-0604–001393). 6. Check if the Tray 1 Empty Actuator is assembled correctly. If needed, replace it (HP Part #: SAM-JC66– 03979A).

Mã lỗi máy in HP M436 Code: M2-1110, M2-2210
Display:M2-1110, M2-2210 Jam inside errors
Description:–M2-1110, Jam inside printer –M2-2210, Jam inside of duplex
Paper jam has occurred inside the printer.
Remedy:1. Open the side cover. Remove the jammed paper.2. If the error persists, send an on-site technician to perform the remaining steps.3. If jammed paper occurs continually, check the following.a. Check if there is any obstacle or contamination on paper path. Remove and clean it.b. From the control panel, enter Tech Mode and execute the main motor tests:Menu > # > 10043616 > Menu > Tech Menu > Diagnostics > Engine Diagnostics > Engine Test Routines > 100 – Motor > 0000 – Main Motor & 0001 — Main Slowc. If the motor operation has a problem, turn the printer off.d. Remove the rear cover.e. Check if the main motor cable is connected correctly. Reconnect the cable. f. If the connection is OK, replace the Main Motor (HP Part #: SAM-JC31–00145A).g. Check if the Regi Sensor connector is connected correctly.h. If the error persists, replace the Regi Sensor (HP Part # SAM-0604–001393).

Mã lỗi máy in HP M436 Code: M3-1110
Display:M3-1110, Jam in exit area
Description:Paper jam has occurred in the exit area.
Remedy:1. Remove any jammed paper from the output tray.2. If the message persists, send an on-site technician to perform the remaining steps.3. Turn the printer off.4. Remove the Exit Unit. If there are any defective parts, replace the Exit Unit (HP Part #: SAM-JC90.01221A).5. Check if the Exit Motor works normally.£ Unplug and reconnect the motor cable. If the connection is OK, replace the Exit Motor (HP Part #: SAM-JCP3.00452A). 6. If the message continually displays, replace the Fuser Unit (HP Part #: SAM-JC91–01217).

Mã lỗi máy in HP M436 Code: S2-331D
Display:S2-331D, Waiting for low temp / Waiting delay time for lower fixing temperature…
Description:The printer is stopped because the temperature of the Fuser Unit is in an abnormal state.
Remedy:Please wait. This error will disappear.

Mã lỗi máy in HP M436 Code: S2-3321
Display:S2-3321, Supplying Toner / Supplying and mixing toner to developer unit. Please wait…
Description:Toner is supplying.
Remedy:Please wait. This error will disappear.

Xin chào quý khách

Đăng ký | Đăng nhập

Email / Điện thoại

Mật khẩu

Nhớ mật khẩu | Quên mật khẩu

Bạn biết đến dịch vụ chúng tôi thông qua

Bạn bè
Tìm kiếm trên internet
Quen biết
Khác

Đang truy cập: 9

Trong ngày: 4

Trong tuần: 536

Lượt truy cập: 3434664

hp1010máy in hải dương máy in sửa máy in đổ mực inmáy in cũ máy in Hải Dương máy in đảo mặt máy in cũ máy in canon3300 máy in canon6300 máy in hp401d Hải Dươnghp2055d máy inhp2055d máy in hải dương bán máy in hộp mực 2055d đổ mực 2055d đổ mực in hải dươngmáy in canon canon 6300dn máy in 6300dn máy in cũ hải dương máy in canon hộp mực 6300dnmáy in cũ canon canon3018 máy in hải dương máy in cũ máy in canon3108trục từ trục từ canon trục từ hp trục từ máy inbochiamayinbộ chia 4 cổng bộ chia máy in 4 cổng bộ chia máy inmáy in hpm135w hpm135w Hải Dương máy in đa năng sửa chữaneverstop hp mucinhp1000w mucdoneverstopđiều khển máy chiếu điều khiển đa năng máy chiếu khien da nang dieu khien may chieu hai duongmực đổ hp1000w mực đổ hp neverstop mực đổ hải dương đổ mực hpcanon6670 mayincanon máy in canon hải dương đổ mực canonreset samsung reset máy in reset máy in samsung. samsungcanon đa năng canon D520 Hp1212nfxerox p225 máy in cũ p225 xerox p225Canon 6200d máy in canon máy in cũ canon 6200d tại Hải Dươngmực đổ hp107 mực hp hải dươngmáy in hp403dw máy in hải dương hp403dw hp m403dwHộp mực máy 3300 hộp mực hải dương canon 3300 hải dươngHộp mực canon 6200 canon 6200 hộp mực incanon 6200máy in canon máy in canon 3310chíp mực hpm348 chíp mực hpm436 chip hpm436 hpm438chip drum hp436 chíp trống hp436 chip drum hp438máy in cũ hải dương máy a3 hải dương hp706kitreset kithafrimwa ha version hpmáy in mayin in bill máy in wificard in canon 2900 canon 2900 card wifi 2900canon2900 canon2900w 2900w mayincanon 214dwcanon 2900sửa máy inmáy in tại Hải Dươngsửa máy in 2900đổ mực in 2900Hải Dươngđổ mực in Hải Dươnglỗi máy in hpm436hp m436error C3-14141máy in hphải dươnglỗi c3-14141 hp436

TRUNG TÂM DỊCH VỤ KỸ THUẬT BẢO TÍN ĐC: Số 240 Nguyễn Văn Linh - Tp. Hải Dương. Mobile: 0983 593 218 (zalo/facebook)

Gọi 0983593218 Fanpage suamayinhaiduong.net/ Zalo 0983593218Zalo Tiktok luongthanhthiep Email mayin.haiduong@gmail.com Kênh Youtube

Bạn cần hỗ trợ?