Code

Description

Remedy

E000

The thermistor has an open circuit or a short circuit.
The heater has an open circuit.
The thermal fuse has blown.
The High-voltage power supply board has a fault.
The DCNT board has a fault.

- Check the connector of the fixing film unit.
- Replace the fixing film unit.
- Replace the High-voltage power supply board.
- Replace the DCNT board.

E100

The scanner assembly has a fault.

- Check the connector of the laser scanner assembly.
- Replace the laser scanner assembly.
- Replace the engine controller PCB.

E198

Flash ROM write error.

- Turn the power OFF and then back ON.
- Replace the SCNT board.

E225

CIS lamp has a fault.

- Turn the power OFF and then back ON.
- Replase the CIS unit.

E674

Modem error.

- Turn the power OFF and then back ON.
- Replace the SCNT board.