ERROR CODE BROTHER HL 2400
Code | Description |
C3 | NVRAM Error (MCTL PCB) |
C4 | Engine Controller MCTL PCB Hardware Error |
C7 | Process Timing Clock Error (Main Motor Clock Error) |
D1 | Clutch Error of the Yellow Developing Unit |
D2 | Clutch Error of the Magenta Developing Unit |
D3 | Clutch Error of the Cyan Developing Unit |
D4 | Clutch Error of the Black Developing Unit |
D5 | HPSI Signal Error (Retract Error of Black and Yellow Toner Cartridge) |
D6 | HPSI Signal Error (Retract Error of Cyan and Magenta Toner Cartridge) |
E1 | Developing Motor Error |
E2 | Main Motor Error |
E3 | Transfer Drum Rotational Error |
E4 | Toner Sensor PCB Error |
E5 | Transfer Roller Solenoid Error |
E6 | Brush Cleaner Solenoid Error |
E7 | Brush Cleaner Clutch Error |
E8 | Fusing Unit Clutch error |
E9 | Belt Sensor Error |
EL | Erase Lamp Error |
Code | Description |
F0 | Control Fan Error |
F2 | Ozone Fan (1) Error |
F4 | Fuser Fan Error |
F5 | Charging HV (DC High Voltage) Error |
H0 | Fuser Thermistor Error |
H2 | Fusing Temperature Error (Warming-up Time Error) |
H3 | Fusing Temperature (3) Error (Heater Continuous ON Time Error) |
H4 | Fusing Temperature (4) Error (Heater Continuous ON Time Error) |
L1 | Beam Sensor Error |
L2 | Scanner Motor Error |
LL | Laser Power Error |