Lỗi máy in canon 6670dn

1. Check the connection of connectors between the Fixing Assembly and the Engine Controller PCB.

2. If the connector at the Fixing Assembly side does not have induction while the assembly is removed, replace the assembly.

1. Check the connection of connectors between the Fixing Assembly and the Engine Controller PCB.

2. If the connector at the Fixing Assembly side does not have induction while the assembly is removed, replace the assembly.

1. Check the connection of connectors between the Fixing Assembly and the Engine Controller PCB.

2. If the connector at the Fixing Assembly side does not have induction while the assembly is removed, replace the assembly.

1. Check the connection of connectors between the Fixing Assembly and the Engine Controller PCB.

2. If the connector at the Fixing Assembly side does not have induction while the assembly is removed, replace the assembly.

Code: E602 1112
Description:Device access error (MEAP-related).
Causes:Device access error (MEAP-related).
Remedy:Turning OFF and then ON the main power executes auto recovery. Since E616-0001 may be displayed in some cases, execute the remedy for E616-0001. * When this error occurs, the firmware downloaded by the CDS Updator will be lost.

Code: E602 1113
Description:Device access error (MEAP-related).
Causes:Device access error (MEAP-related).
Remedy:Turning OFF and then ON the main power executes auto recovery. Since E616-0001 may be displayed in some cases, execute the remedy for E616-0001. * When this error occurs, the firmware downloaded by the CDS Updator will be lost.

Code: E602 1302
Description:File system could not be initialized normally
Causes:File system could not be initialized normally
Remedy:Turning OFF and then ON the main power executes auto recovery. * When this error occurs, the firmware downloaded by the CDS Updator will be lost.

Code: E602 1312
Description:Device access error
Causes:Device access error
Remedy:Turning OFF and then ON the main power executes auto recovery. * When this error occurs, the firmware downloaded by the CDS Updator will be lost.

Code: E602 1313
Description:Device access error
Causes:Device access error
Remedy:Turning OFF and then ON the main power executes auto recovery. * When this error occurs, the firmware downloaded by the CDS Updator will be lost.

Code: E602 1602
Description:File system could not be initialized normally (CDS-related).
Causes:File system could not be initialized normally (CDS-related).
Remedy:Turning OFF and then ON the main power executes auto recovery. * When this error occurs, the firmware downloaded by the CDS Updator will be lost.

Code: E602 1612
Description:Device access error (CDS-related).
Causes:Device access error (CDS-related).
Remedy:Turning OFF and then ON the main power executes auto recovery. * When this error occurs, the firmware downloaded by the CDS Updator will be lost.

Code: E602 1613
Description:Device access error (CDS-related).
Causes:Device access error (CDS-related).
Remedy:Turning OFF and then ON the main power executes auto recovery. * When this error occurs, the firmware downloaded by the CDS Updator will be lost.

Code: E604 0001
Description:Memory error
Causes:Failed to allocate the memory required to start PDL.
Remedy:Check the installed memory, remove and then install the memory, and replace the memory.

Code: E616 0001
Description:MEAP application is lost.
Causes:MEAP application is lost.
Remedy:Select Function.gr > MEAP > MEAP FUNCTION = ON, and turn OFF and then ON the main power. * The setting is switched to the following after reboot. Initial screen setting: Native MEAP authentication: Off USB-Host setting: Native CDS-related: Off

Code: E730 100A
Description:System error
Causes:System error
Remedy:1. Turn OFF and then ON the main power. 2. Replace the Main Controller PCB.

Code: E730 C000
Description:An error, such as failure in memory retrieval at initialization, occurred.
Causes:An error, such as failure in memory retrieval at initialization, occurred.
Remedy:Turning OFF and then ON the main power executes auto recovery.

Code: E730 D000
Description:An error, such as failure in memory retrieval at initialization, occurred.
Causes:An error, such as failure in memory retrieval at initialization, occurred.
Remedy:Turning OFF and then ON the main power executes auto recovery.

Code: E733 0000
Description:Printer communication error
Causes:Communication error at initial communication, and packet error
Remedy:1. Turn OFF and then ON the main power. 2. Replace the Main Controller PCB.

Code: E733 0001
Description:Printer communication error
Causes:Communication error occurred after normal startup.
Remedy:1. Turn OFF and then ON the main power. 2. Replace the Main Controller PCB.

Code: E733 0004
Description:Printer communication error
Causes:Command error
Remedy:1. Turn OFF and then ON the main power. 2. Replace the Main Controller PCB.

Code: E733 0006
Description:Printer communication error
Causes:An unknown communication error
Remedy:1. Turn OFF and then ON the main power. 2. Replace the Main Controller PCB.

Code: E744 1100
Description:System error
Causes:System error
Remedy:1. Turn OFF and then ON the main power. 2. Replace the Main Controller PCB.

Code: E748 2012
Description:System error
Causes:System error
Remedy:Contact the service company office
Code: E760 0000
Description:Firmware error
Causes:An error due to the controller software occurred so that print could not be proceeded.
Remedy:Due to firmware error, the possibility of solving the error by replacing the Main Controller PCB is low. Check the downloaded firmware again.

Code: E805 0000
Description:Main Fan error
Causes:Main Fan failure is detected.
Remedy:1. Check the Main Fan or the connector. 2. Replace the Main Fan 3. Replace the Main Controller PCB.

Code: E808 0001
Description:Failure detection of Low Voltage Power Supply PCB
Causes:Failure detection of Low Voltage Power Supply PCB
Remedy:1. Check the connection of the Engine Controller or the connector. 2. Replace the Engine Controller PCB.

xem thêm bản dịch dưới