Lỗi Máy in brother HL2321D - ERROR CODE BROTHER HL2321D (p2)

Lỗi 0505 máy in Brother 2321

Error Code: 0505 Brother 2321 

• Display:Print Unable 05 Turn the power off and then back on again.
• Description:The center thermistor of the fuser unit detected a temperature rise greater than the specified value within the specified time.
• Remedy:<User Check> • Turn OFF the power switch. After several seconds, turn ON the power again and check that this error is reset.
  1 Connection failure of the center or side thermistor harness of the fuser unit Reconnect the center or side thermistor harness of the fuser unit. 2 Connection failure of the fuser unit heater harness Reconnect the fuser unit heater harness. 3 Connection failure of the eject sensor PCB flat cable Reconnect the eject sensor PCB flat cable. 4 Connection failure of the LVPS harness Reconnect the LVPS harness. 5 Eject sensor PCB failure Replace the eject sensor PCB ASSY. 6 Fuser unit failure Replace the fuser unit. 7 Low-voltage power supply PCB failure Replace the low-voltage power supply PCB ASSY. 8 Main PCB failure Replace the main PCB ASSY.
  

Lỗi 0506 máy in Brother 2321

Error Code: 0506 Brother 2321 

• Display:Print Unable 05 Turn the power off and then back on again.
• Description:The center thermistor of the fuser unit detected a temperature fall greater than the specified value within the specified time.
• Remedy:<User Check> • Turn OFF the power switch. After several seconds, turn ON the power again and check that this error is reset.
  1 Connection failure of the center or side thermistor harness of the fuser unit Reconnect the center or side thermistor harness of the fuser unit. 2 Connection failure of the fuser unit heater harness Reconnect the fuser unit heater harness. 3 Connection failure of the eject sensor PCB flat cable Reconnect the eject sensor PCB flat cable. 4 Connection failure of the LVPS harness Reconnect the LVPS harness. 5 Eject sensor PCB failure Replace the eject sensor PCB ASSY. 6 Fuser unit failure Replace the fuser unit. 7 Low-voltage power supply PCB failure Replace the low-voltage power supply PCB ASSY. 8 Main PCB failure Replace the main PCB ASSY.

Lỗi 050A máy in Brother 2321 

Error Code: 050A Brother 2321 

• Display:Print Unable 05 Turn the power off and then back on again.
• Description:The hardware detected a temperature error through the center thermistor or the side thermistor of the fuser unit.
• Remedy:<User Check> • Turn OFF the power switch. After several seconds, turn ON the power again and check that this error is reset.
  1 Connection failure of the center or side thermistor harness of the fuser unit Reconnect the center or side thermistor harness of the fuser unit. 2 Connection failure of the fuser unit heater harness Reconnect the fuser unit heater harness. 3 Connection failure of the eject sensor PCB flat cable Reconnect the eject sensor PCB flat cable. 4 Connection failure of the LVPS harness Reconnect the LVPS harness. 5 Eject sensor PCB failure Replace the eject sensor PCB ASSY. 6 Fuser unit failure Replace the fuser unit. 7 Low-voltage power supply PCB failure Replace the low-voltage power supply PCB ASSY. 8 Main PCB failure Replace the main PCB ASSY.

TRUNG TÂM DỊCH VỤ KỸ THUẬT BẢO TÍN

 “MUA BÁN - BẢO HÀNH - SỬA CHỮA MÁY KHOAN BẮT VÍT CHẠY PIN TẠI HẢI DƯƠNG”

*****

Địa chỉ: Số 240 Nguyễn Văn Linh - Tp. Hải Dương.

Điện thoại: 0220. 3891 366 -  Mobile: 0983 593 218 (zalo/facebook)

Website: http://suamayinhaiduong.net/ 

---->>>>>fb/luongthanhthiep <<<----

---->>>Tiktok<<<-----

Tags: may in hai duong, sua may in hai duong, do muc in hai duong, may in cu hai duong, sua may chieu hai duong, may chieu hai duong, sua may in uy tin hai duong,sua may in chuyen nghiep hai duong, sua may photo hai duong, sua may in hai duong, do muc in chat luong cao hai duong, do muc may in hai duong, do muc may in tai hai duong, do muc in hai duong

Đổ mực máy in - Sửa máy in - Máy khoan pin - Dịch vụ sửa chữa máy in - Máy in cũ