Bảng báo lỗi máy in Epson Artisan 710

• Code: 01
• Display:A printer error has occurred. Turn off the printer and turn it on again. See your documentation.
• Description:Fatal error (printer mechanism)
• Causes:Mechanical trouble occurred.
• Remedy:1.Is the CR Motor cable properly connected to CN21 connector on the Main Board? 1.Connect the CR Motor cable correctly to CN21 connector on the Main Board. 2.Is the CR Motor cable damaged? 2.Replace the CR Motor with a new one. 3.Does the CR Motor operate normally? 3.Replace the CR Motor with a new one. 1.Is the CR Encoder damaged? 1.Replace the CR Encoder with a new one. 2.Is the FFC correctly connected to the connector on the CR Encoder? 2.Connect the Head FFC correctly. 1.Is the CR Scale properly centered in the slit of the CR Encoder? 1.Install the CR Scale correctly. 2.Is the CR Scale surface clean? 2.Wipe any dirt off the surface of the CR Scale. When the contamination is severe, replace the CR Scale with a new one. 3.Is the CR Scale damaged? 3.Replace the CR Scale with a new one. 4.Is the CR Scale correctly installed? 4.Install the CR Scale and the torsion spring correctly. 1.Is the Upper Paper Guide correctly installed? 1.Install the Upper Paper Guide correctly. 1.Is the Carriage Shaft free from dirt, and adequately lubricated? 1.Clean the Carriage Shaft and lubricate it as specified. 1.Is the CR Guide Plate free from dirt, and adequately lubricated? 1.Clean the CR Guide Plate and lubricate it as specified. 1.Is the Ink Tube correctly routed? 1.Route the Ink Tube correctly. 1.Is the Head FFC correctly routed? 1.Route the Head FFC correctly. 1.Is the Carriage path contaminated with foreign material (slip of paper)? 1.Remove any foreign material from Carriage path. 1.Is the CR Timing Belt correctly installed to Timing Driven Pulley Assy? 1.Install the Timing Driven Pulley Assy to CR Timing Belt correctly. 2.Is the CR Timing Belt correctly installed to the Pinion Gear of the CR Motor? 2.Install CR Timing Belt correctly. 1.Is tension of the CR Timing Belt appropriate? 1.Reassemble the CR Timing Belt and check the tension of the CR1.Is the PF Motor cable properly connected to CN22 connector on the Main Board? 1.Connect the PF Motor cable correctly to CN22 connector on the Main Board. Timing Belt again. If the tension is still not appropriate, replace the Printer Mechanism. 2.Is the PF Motor cable damaged? 2.Replace the PF Motor with a new one. 3.Does the PF Motor operate normally? 3.Replace the PF Motor with a new one. 1.Check if the firmware is the latest. 1.Update the firmware to the latest. 1.Check if the CR lock lever moves smoothly. 1.Replace the Ink System with a new one.

• Code: 02
• Display:It is likely that a paper jam has occurred in the printer. Turn off the printer, then open the scanner unit and remove the paper. See your documentation.
• Description:Fatal error (paper jam)
• Causes:Mechanical trouble occurred.
• Remedy:1.Is the CR Motor cable properly connected to CN21 connector on the Main Board? 1.Connect the CR Motor cable correctly to CN21 connector on the Main Board. 2.Is the CR Motor cable damaged? 2.Replace the CR Motor with a new one. 3.Does the CR Motor operate normally? 3.Replace the CR Motor with a new one. 1.Is the CR Encoder damaged? 1.Replace the CR Encoder with a new one. 2.Is the FFC correctly connected to the connector on the CR Encoder? 2.Connect the Head FFC correctly. 1.Is the CR Scale properly centered in the slit of the CR Encoder? 1.Install the CR Scale correctly. 2.Is the CR Scale surface clean? 2.Wipe any dirt off the surface of the CR Scale. When the contamination is severe, replace the CR Scale with a new one. 3.Is the CR Scale damaged? 3.Replace the CR Scale with a new one. 4.Is the CR Scale correctly installed? 4.Install the CR Scale and the torsion spring correctly. 1.Is the Upper Paper Guide correctly installed? 1.Install the Upper Paper Guide correctly. 1.Is the Carriage Shaft free from dirt, and adequately lubricated? 1.Clean the Carriage Shaft and lubricate it as specified. 1.Is the CR Guide Plate free from dirt, and adequately lubricated? 1.Clean the CR Guide Plate and lubricate it as specified. 1.Is the Ink Tube correctly routed? 1.Route the Ink Tube correctly. 1.Is the Head FFC correctly routed? 1.Route the Head FFC correctly. 1.Is the Carriage path contaminated with foreign material (slip of paper)? 1.Remove any foreign material from Carriage path. 1.Is the CR Timing Belt correctly installed to Timing Driven Pulley Assy? 1.Install the Timing Driven Pulley Assy to CR Timing Belt correctly. 2.Is the CR Timing Belt correctly installed to the Pinion Gear of the CR Motor? 2.Install CR Timing Belt correctly. 1.Is tension of the CR Timing Belt appropriate? 1.Reassemble the CR Timing Belt and check the tension of the CR1.Is the PF Motor cable properly connected to CN22 connector on the Main Board? 1.Connect the PF Motor cable correctly to CN22 connector on the Main Board. Timing Belt again. If the tension is still not appropriate, replace the Printer Mechanism. 2.Is the PF Motor cable damaged? 2.Replace the PF Motor with a new one. 3.Does the PF Motor operate normally? 3.Replace the PF Motor with a new one. 1.Check if the firmware is the latest. 1.Update the firmware to the latest. 1.Check if the CR lock lever moves smoothly. 1.Replace the Ink System with a new one.

• Code: 03
• Display:A scanner error has occurred. See your documentation.
• Description:Fatal error (Scanner)
• Causes:Mechanical trouble occurred.
• Remedy:1.Is the CR Motor cable properly connected to CN21 connector on the Main Board? 1.Connect the CR Motor cable correctly to CN21 connector on the Main Board. 2.Is the CR Motor cable damaged? 2.Replace the CR Motor with a new one. 3.Does the CR Motor operate normally? 3.Replace the CR Motor with a new one. 1.Is the CR Encoder damaged? 1.Replace the CR Encoder with a new one. 2.Is the FFC correctly connected to the connector on the CR Encoder? 2.Connect the Head FFC correctly. 1.Is the CR Scale properly centered in the slit of the CR Encoder? 1.Install the CR Scale correctly. 2.Is the CR Scale surface clean? 2.Wipe any dirt off the surface of the CR Scale. When the contamination is severe, replace the CR Scale with a new one. 3.Is the CR Scale damaged? 3.Replace the CR Scale with a new one. 4.Is the CR Scale correctly installed? 4.Install the CR Scale and the torsion spring correctly. 1.Is the Upper Paper Guide correctly installed? 1.Install the Upper Paper Guide correctly. 1.Is the Carriage Shaft free from dirt, and adequately lubricated? 1.Clean the Carriage Shaft and lubricate it as specified. 1.Is the CR Guide Plate free from dirt, and adequately lubricated? 1.Clean the CR Guide Plate and lubricate it as specified. 1.Is the Ink Tube correctly routed? 1.Route the Ink Tube correctly. 1.Is the Head FFC correctly routed? 1.Route the Head FFC correctly. 1.Is the Carriage path contaminated with foreign material (slip of paper)? 1.Remove any foreign material from Carriage path. 1.Is the CR Timing Belt correctly installed to Timing Driven Pulley Assy? 1.Install the Timing Driven Pulley Assy to CR Timing Belt correctly. 2.Is the CR Timing Belt correctly installed to the Pinion Gear of the CR Motor? 2.Install CR Timing Belt correctly. 1.Is tension of the CR Timing Belt appropriate? 1.Reassemble the CR Timing Belt and check the tension of the CR1.Is the PF Motor cable properly connected to CN22 connector on the Main Board? 1.Connect the PF Motor cable correctly to CN22 connector on the Main Board. Timing Belt again. If the tension is still not appropriate, replace the Printer Mechanism. 2.Is the PF Motor cable damaged? 2.Replace the PF Motor with a new one. 3.Does the PF Motor operate normally? 3.Replace the PF Motor with a new one. 1.Check if the firmware is the latest. 1.Update the firmware to the latest. 1.Check if the CR lock lever moves smoothly. 1.Replace the Ink System with a new one.

• Code: 04
• Display:The printer's ink pads are at the end of their service life. Please contact Epson support.
• Description:Maintenance request (waste ink over flow)
• Causes:The waste ink counter exceeds to capacity.
• Remedy:1. Is the Scanner Motor cable properly connected to CN49 connector on the Main Board? 1. Connect the Scanner Motor cable correctly to CN49 connector on the Main Board. 2. Is the coil resistance of the Scanner Motor TBD Ohm Check with the tester. 2. Replace the Scanner Motor cable with a new one. 3. Is the Scanner Motor Cable damaged? 3. Replace the Scanner Motor cable with a new one. 1. Is the Scanner CR Encoder FFC properly connected to CN49 connector on the Main Board? 1. Connect the Scanner CR Encoder FFC correctly to CN49 connector on the Main Board. 2. Is the Scanner CR Encoder FFC damaged? 2. Replace the Scanner CR Encoder FFC with a new one. 1. Is the Scanner Carriage FFC properly connected to CN41 connector on the Main Board? 1. Connect the Scanner Carriage FFC correctly to CN41 connector on the Main Board. 2. Is the Scanner Carriage FFC damaged? 2. Replace the Scanner Carriage FFC with a new one. 1. Is the Scanner Carriage Unit damaged? 1. Replace the Scanner Carriage FFC with a new one.

Chú y: để dễ hiểu hơn bạn copy vào GOOG dịch

TRUNG TÂM DỊCH VỤ KỸ THUẬT BẢO TÍN

ĐC: 240 Nguyễn Văn Linh – TP. Hải Dương

ĐT: 0220 3891 366 Mobile: 0983.593.218 – 0168.55.88.111

 web:suamayinhaiduong.net E-mail: mayin.haiduong@gmail.com

 Facebook: luongthanhthiep – fanpage: suamayinhaiduong.net